Ballistic XP80 sea trial: This 50-knot explorer has a trick up its sleeve [html]Is the new Ballistic XP80 really “The Ultimate Adventure RIB”? MBY's Alex Smith heads to Trafalgar Wharf in Portsmouth to test its mettle...
When MD, Jonny Boys, acquired the rights to build Ballistic RIBs back in 2002, his first move was to enter a team of boats into the 600-mile Trans Agulhas endurance race around the southernmost tip of Africa. The idea was to use the feedback from that event in a bid to upgrade the existing designs […]
This article Ballistic XP80 sea trial: This 50-knot explorer has a trick up its sleeve appeared first on Motor Boat & Yachting .
Is the new Ballistic XP80 really “The Ultimate Adventure RIB”? MBY's Alex Smith heads to Trafalgar Wharf in Portsmouth to test its mettle...
When MD, Jonny Boys, acquired the rights to build Ballistic RIBs back in 2002, his first move was to enter a team of boats into the 600-mile Trans Agulhas endurance race around the southernmost tip of Africa.
The idea was to use the feedback from that event in a bid to upgrade the existing designs – and that’s exactly what he did. What followed was the development of a deep-vee hull with long unbroken spray rails and pronounced reverse chines for extra dryness and stability.
But in terms of style and deck layout, Ballistic RIBs remained quite traditional. What we came to expect of them were fast seaworthy boats with a soft dry ride and a co*mercially inspired fit-out co*prising inline jockey seats on an open deck between an aft bench and a central helm console.
In fact, even on its modern fleet, that formula felt as prevalent on its LS (Leisure) boats as it did on its WK (Work) models. But now, in the form of Ballistic’s first explorer model, the Ballistic XP80, we have something altogether more creative.
On the face of it, there appears to be a lot of wasted space at the aft end of the cockpit, with all kinds of elaborate mouldings that don’t seem co*pletely necessary. After all, the big inflatable collar already reduces the internal beam to around 5ft so reducing it further with rigid structures on either side of the aft bench seems counterintuitive.
Article continues below…
class="featured-image"> src="ht**://www.mby.c**/wp-content/themes/simba-theme/assets/images/placeholder.png" data-src="ht**://keyassets.timeincuk.net/inspirewp/live/wp-content/uploads/sites/18/2021/12/fugu-29-rib-test-drive-review-920x518.jpg" data-id="118779" class=" lazyload blur-up" alt="fugu-29-rib-test-drive-review" width="920" height="518" data-srcset=" ht**://keyassets.timeincuk.net/inspirewp/live/wp-content/uploads/sites/18/2021/12/fugu-29-rib-test-drive-review-320x180.jpg 320w, ht**://keyassets.timeincuk.net/inspirewp/live/wp-content/uploads/sites/18/2021/12/fugu-29-rib-test-drive-review-620x349.jpg 620w, ht**://keyassets.timeincuk.net/inspirewp/live/wp-content/uploads/sites/18/2021/12/fugu-29-rib-test-drive-review-920x518.jpg 920w, "/>