Topic: The Best Rifles of 2022, Tested and Reviewed (Read 33 times)
previous topic - next topic
It's your post, so post it!
Report Card
Accuracy International AT-X Specs
Accuracy International threw down the gauntlet when they introduced the AT-X last year. They wanted to put all the makers of rifles for long-range co*petition on notice. AI, as you might know, makes some of the best sniper rifles in the world and their historic focus has always been on military and law enforcement.
Despite the expense of their rifles and the fact that they are built with the battlefield in mind, rather than shooting matches, a devoted number of civilian shooters have used their rifles in co*petition, including myself. For me and these other shooters the exceptional accuracy and ruggedness of AI’s rifles makes up for some of the co*petition-specific features the rifles have lacked.
Well, we don’t have to co*promise anymore. The AT-X is AI’s first purpose-built co*petition rifle, and it has a number of design elements that shooters in field-style matches, like the NRL, PRS, and RTC, will find appealing.
The fore-end has a flat bottom that incorporates an ARCA dovetail that extends straight back to the magazine well. This is the most notable change in the stock from other AI chassis. The mag well has a cut to easily insert and remove magazines, which are released by a broad paddle-style lever in front of the trigger guard. The stock is festooned with AI’s proprietary Key Slot cuts to attach accessories. AI’s Key Slot predates (and is superior to) the often-derided Key Mod system, but it does mean a shooter will have to invest in AI-specific hardware to affix rails and other accessories to the stock.
The action uses AI’s six-lug system (two rows of three lugs) that has been a mainstay of the co*pany for decades. The short, snappy bolt throw helps the shooter cycle the rifle quickly and the more wear and tear (and grit and grime) the shooter exposes the rifle to, the better the action seems to run. The three-position safety mounted on the bolt shroud is smooth, positive, and bomb-proof.
One very nice feature is the quick barrel-change system. By loosening a single set screw, the shooter can swap barrels. Our sample was chambered in 6.5 Creedmoor, but barrels can be had in .308 Win., 6mm Creedmoor, 6 BR, and others.
The two-stage trigger is remarkable and provides outstanding control. The trigger on our rifle broke at 10.4 ounces, has a flat face and is adjustable for trigger reach, one of the many dimensions that the shooter can alter for a custom fit. (The rifle also co*es with a heavier spring for the trigger that will set the minimum break weight to 1.5 pounds.)
The stock as you might imagine can be altered every which way as well. The length of pull, co*b height, co*b orientation, and recoil pad position all adjust. LOP and cheek hardware are secured by allen-key bolts while the recoil pad adjusts with a single wheel that the shooter can tweak on the fly.
The rifle runs off AI AW magazines, which are co*pact 10-round double-stack magazines that are easy to load, even through the ejection port with the magazine in place.
This short (and inco*plete) list of features doesn’t really capture the essence of what makes the AT-X special, however. Of course, there’s the rifle’s accuracy, which was far and away the best of the test. The average 5-shot group measured .456 inches, which is outstanding for factory ammunition. But beyond this was how well the rifle handled. The AT-X is so steady and responsive that only the most insensible clod could fail to shoot better when running it.
The rifle delivers exceptional feedback. All the members of the test team co*mented on this quality. Even when shooting tiny groups, which the AT-X does at will, it was easy to call our shots when the trigger broke. The bullet holes appeared exactly where you expected them to. The AT-X inspires confidence.
Perhaps the only thing we didn’t care for was what isn’t included in the base $4,995 price. You don’t get any of the proprietary Picatinny rail sections (and an ability to attach a sling to the front of the stock). Nor does the stock fold. It would also be a benefit if the various fasteners all used the same size Allen-key. As it stands now, you need a small tool kit to service the rifle.
These critiques aside, the AI AT-X wooed the entire test team and sets a new standard for what a factory rifle can deliver.
Report Card
Seekins Precision Havak HIT Specs
At the risk of venturing into dad-joke territory, HIT is an apt name for this rifle because it is an unqualified homerun for Seekins Precision. We’ve co*e to expect good things from Glen Seekins, but even when stacked against our lofty expectations, this new, innovative, accurate, versatile, and fun rifle blew us away.
Let’s examine each of those qualities in turn.
Some guns are newer than others. Some are built on pre-existing parts shared across different co*panies. Not the HIT. Except for the trigger, this rifle is entirely of Seekins’ design and the chassis and barrel change system are new as of late last year.
There are a lot of innovations stacked in this rifle. To change the barrel, for example, all that’s needed is for the shooter to loosen an easily accessible set screw positioned at the base of the forward edge of the Picatinny rail and then unscrew the barrel from the receiver. Changing to a cartridge with a different sized bolt face is simply a matter of removing the bolt from the action and swapping bolt heads, a process that takes about a minute.
With the proliferation of precision rifles, there’s no shortage of chassis on the market, and many gun makers have gone to after-market suppliers. Some of those chassis are very good (and expensive) and others are just okay, but affordable. It’s a roll of the dice for any gun maker to build their own, but the gamble paid off for Glen. Not only is his folding-stock design excellent, but by keeping those costs in-house he’s able to offer the HIT at an incredible price, which is why this rifle was a unanimous Great Buy pick.
The ultimate yardstick by which any precision rifle is judged is its accuracy. The Seekins Havak HIT makes the grade with room to spare. It was second in accuracy only to the Accuracy International AT-X, but even that doesn’t really reflect the rifle’s performance as the AI had a couple advantages over the Seekins. Specifically, the AI was run with an optional weight system installed that boosted its scoped weight to nearly 20 pounds versus the 14-pound, 2-ounce weight of the Seekins with its scope. Next, the Seekins was chambered in 6.5 PRC as opposed to the 6.5 Creed in the AI. With more factory loads to pick from, a rifle in 6.5 Creed will have an easier time finding more accurate ammunition, plus there’s the minor (but not negligible) disparity in the relative recoil of the two cartridges.
So that makes the average 5-shot group size of the Seekins—.542 inches—all the more impressive. It shot Hornady 147-grain ELD-M bullets especially well, with several sub-.5 MOA groups. But it also turned in excellent results with Federal’s 130-grain Terminal Ascent and Hornady’s 143-grain ELD-X, both of which are very effective long-range hunting bullets, with numerous groups between .5 and .6 inches from each.
That speaks in part to the versatility of the rifle, which wowed the judges as well. Down the road we’ll probably see carbon-fiber barrels for the HIT, which will drop it’s 11.5-pound weight to something that’s more in keeping with standard big-game rifles. With its folding stock, it can be stashed within a pack making it a viable option for hunters on the move. Conversely, there are numerous attachment points to add weight to configure it for precision rifle co*petitions where 20-pound guns are the norm.
The current list of available drop-in barrels includes 6mm GT, 6mm Creedmoor, 6.5 Creedmoor, 6.5 PRC, and .308 Win. The 6s and 6.5s barrels all have 1:8 twists, while the .308 is 1:11.25.
For a bunch of gun nerds like the Outdoor Life test team this adds up to a rifle that is a blast to run. The rifle is responsive, well-balanced and has great ergonomics. None of the rifles in this year’s test posted such high scores across the board, which is what drove it to an impressive (and rare) double award win.
Report Card
CZ-600 Alpha Specs
The 600 series is the future of CZ’s centerfire rifles. Introduced in late 2021, this platform replaces the previous actions, which while beloved, were co*paratively co*plicated to produce and out of step with more modern firearms manufacturing that favors modular platforms. (Read our full review on the 600 Alpha introduction here).
That modularity was evident with the product launch. CZ kicked off the 600-era with four distinct configurations creating rifles with vastly different missions.
The Alpha is the base model, the economy version if you will, and while the other 600s might have fancier stocks and more tricked out features, none of them can match the Alpha for pure value. In fact, none of the other new rifles could match the Alpha in value either, which is why it won this year’s Great Buy award by a co*fortable margin.
The Alpha is a solid, all-around big-game rifle that won’t break the bank. And it is built in such a way that it will happily do just about anything you ask of it. It would be perfectly at home in a deer camp, hanging in the rear-window rack of a pickup, taking a bead on a prairie dog, or just punching holes in paper.
It was more accurate than a number of rifles costing twice as much (or more). The average 5-shot group from the Alpha measured .814 inches, with a number of groups measuring less than .75 inches.
Our sample was chambered in 6mm Creedmoor. Among the different types of factory ammo we shot, the CZ did well with Nosler’s 105-grain RDF, Hornady’s 108-brain ELD-M, and the Berger 105-grain Hybrid.
The 600 series has a couple interesting innovations built into it, including one of the better, and more idiot-proof, adjustable triggers we’ve ever seen. The adjustment screw is located right in front of the trigger and has four easy-to-see settings you can choose from. At the lightest setting, ours trigger pull was a sweet 1 pound, 11 ounces.
It also has a curious safety that is a crossbolt that runs vertically through the grip, with the top just behind the bolt shroud and the bottom located just behind the trigger guard. Pushing down on the plunger puts the rifle in “fire” mode and with the safety up the bolt locks into position, which is a useful feature on a hunting rifle. You can still open the bolt with the rifle on safe by depressing the ergonomic bolt release tab just aft of the ejection port. With a little practice the safety beco*es intuitive to manipulate.
The detachable box magazine sits nearly flush with the stock and because it has a double-stack design, it’s able to hold 5 rounds. To insert the magazine correctly you need to rock in place pushing on the rear of the magazine first. The fact that you can’t just push the magazine straight in and have it seat home irritated some of the judges. Removing the magazine requires no similar digital manipulation. A push on the slightly recessed mag release in front of the mag well will pop the magazine free.
The Alpha has two rail sections on the receiver for mounting a scope, another nice value-added element. The barrel is threaded for suppressors and the like. If you’ve read about the CZ-600 before, no doubt you heard about its switch-barrel capability. Unfortunately, CZ has had to walk back on that feature. Going forward, all 600s will have their barrel permanently affix in place and they’ve issued a recall for the 600s they shipped out prior. You can read about the issue here. I know they are looking at ways to reincorporate this feature down the road, and I hope they do, because it is another cool feature of the platform.
Report Card
Proof Tundra Specs
The Proof Tundra is an undeniably se*y rifle with a price tag to match. It is more than just a pretty face, however—it’s a shooter. The two most accurate rifles of the test were the Accuracy International AT-X and the Seekins Precision Havak HIT—both heavy-barreled precision rifles—but the Proof Tundra nipped at their heels with an average 5-shot group size of .683 inches making it the most accurate hunting rifle of the evaluation.
Chambered in 6.5 Creedmoor it shot its best groups with 140-grain loads. All but two of the top 10 five-shot groups were with 140s from Federal, Nosler, and Hornady.
That accuracy takes some of the sting out of the $7,699 cost, but what else does the Tundra offer to motivate a hunter looking to spend the kids’ inheritance? A couple things co*e to mind. First, is the Tundra’s excellent balance. At 7 pounds, 2 ounces it hits a sweet-spot for a versatile big-game rifle. It handles nimbly from practical field positions with a lively, capable feel. It came quickly to shoulder and cycled well. Some testers felt the trigger reach was a bit excessive for their tastes, but other than that no one had any issues with the rifle’s function.
The fit and finish is one area where the Tundra really shines. The inletting between the stock and action is perfect and upon close inspection it is easy to see the level of craftsmanship that went into the Tundra, elevating it above the other high-priced hunting rifles in the test. The perfectly flush line where the stock and ejection port meet is one example.
The adjustable cheek piece on the stock is a useful feature and well executed. Often, adding an adjustable co*b co*es with a significant increase in weight, but Proof’s design is light and allows for quick in-field adjustments.
The team was split on the stock’s finish. Some of us liked the snake-scale pattern, which added a bit of texture for a secure handhold, others thought it looked too much like fishnet stockings for their taste. Given that Proof offers the rifle in a number of finishes, including custom paint jobs, this isn’t likely to dissuade a potential buyer.
In addition to the 6.5 Creedmoor, the Tundra co*es chambered in 6 Creed, 6.5 PRC, 7mm Rem. Mag., 28 Nosler, .308 Win., .300 Win. Mag., .300 PRC, and for those who just can’t have enough recoil, the .300 RUM, and .338 Lapua.
Report Card
Christensen Arms Ridgeline Scout Specs
Christensen Arms has been one of the most exciting gun makers in recent years. They’ve been on a roll of late and it looks like for 2022 they have another winner with the Ridgeline Scout (read our full review on the Ridgeline Scout here).
The Scout co*es with a 16-inch carbon-fiber barrel that is threaded and ships with a cool-looking (but superfluous) three-pronged flash hider. The short barrel is one of the key elements of the Scout-rifle concept. Also in keeping with the Scout vibe, the Christensen Arms is fed by a detachable box magazine (an AICS pattern) and is sub-6 pounds at 5 pounds, 14 ounces.
Scout rifles are meant to be handy general-purpose rifles that can work for hunting, personal protection or any other rifle-related chores and the jack-of-all-trades versatility of the Ridgeline Scout was immediately evident to all the gun test judges.
We could see it as a mountain rifle for sheep in Alaska, as a handy tree-stand deer rifle in the Midwest, as a suppressed hog gun in Texas, as a walking varmint rifle, and even as a viable option for the NRL Hunter co*petition series.
The rifle’s good accuracy helps inspire this confidence in its potential. It averaged .784 inches, with a number of five-shot groups smaller than .6 inches. The rifle can be had in five chamberings: 6.5 Creedmoor, which was what we tested, .300 BLK, .223 Rem., .308 Win., and 6mm ARC.
Universally, we found the rifle fun to shoot. We ran it several times through the Gunsite Academy Scrambler, where its virtues really shone. The oversized bolt handle made cycling the action a snap and even with a suppressor attached, the rifle’s balance and dynamic handling was excellent.
The rifle co*es with a short section of Picatinny rail on the fore-end that incorporates a barricade block and serves as a mounting point for a bipod. The stock is carbon fiber and has stainless steel bedding pil*ars, and is stiff, strong and co*fortable. The black nitride finish keeps the action running smoothly, but we did need to clean the rifle occasionally to keep the bolt lift from getting gummy.
The only misstep with the rifle’s configuration is the flat-faced trigger. The trigger itself, a TriggerTech, is excellent, but the flat face doesn’t work with the stock’s geometry. The trigger finger ends up bearing unevenly on the trigger face because of the curved radius of the stock’s grip. A normal curved trigger would work better.
But that didn’t prevent us from shooting the Ridgeline Scout nearly nonstop during the week-long evaluation. Even at $2,199 we thought it a wonderful value and and a strong choice for a do-it-all rifle.
Report Card
Marlin 1895 SBL Specs
The reintroduced Marlin 1895 SBL, now being produced by Ruger at its Mayodan, North Carolina, factory has garnered a lot of attention, and for good reason. Not only has Ruger rescued the beloved Marlin brand from the brink of destruction, but it’s making the finest production Marlin lever guns ever (read our full review on the Marlin 1895 SBL here).
The 1895 SBL was Marlin’s first model to go into production following the acquisition of the co*pany by Ruger. It is an appealing configuration, a short-barreled .45/70 in stainless steel stocked with an attractive gray laminate stock and equipped with an oversized lever loop and an XS Sights rail and ghost ring sight set.
We removed the ghost ring sight in order to mount a Leupold Mark 6 1-6×20, which is an ideal optic for the platform, allowing for close-up fast shooting while be able to reach out for the longer shots that the 1895 SBL is capable of making.
The 1895 cycles through the six rounds it can hold quickly, and did so in a reliable, consistent manner. The precise-fitting CNC-machined and EDM-cut co*ponents eliminate the slop that can bedevil some lever guns and make them hang up.
The average 5-shot group from the Marlin came in at 1.66 inches. Hornady’s 325-grain FTX load delivered the best accuracy with groups that averaged 1.28 inches. With that kind of performance, you can really reach out despite the .45/70’s rainbow trajectory. With the right elevation and windage hold, the Marlin is capable to 300 yards.
But its happy place is shooting that’s up close and personal. Once we got done with the accuracy portion of the evaluation, we were able to let loose and give the steel targets at Gunsite a proper workout with the heavy .45/70 slugs. The rifle’s 7-pound, 4-ounce heft, broad recoil pad, hand-filling fore-end, and polished lever loop make it co*fortable to shoot even with stout loads.
The fit and finish of the stock and metalwork is a step above the Marlins of old. The checkering is the best I’ve seen on any modern Marlin production gun, while the engraving on the metal is tasteful and attractive. By any yardstick, Marlin is back and its prospects are brighter than ever.
Tanner Denton